- Forum
- English Forum
- Users
- Show us your Stepcraft Creations
- New hose holder (at the base of the miller)
Frage
New hose holder (at the base of the miller)
- Denus
-
Autor
- Offline
- Forum Nutzer
-
- Jack of all hobbies, master of none!
Weniger
Mehr
03 Nov 2015 16:45 #26490
von Denus
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Dieser Beitrag enthält Bilddateien.
New hose holder (at the base of the miller) wurde erstellt von Denus
I made a holder long time ago, but decided today to make one out of beech.
Some little modifications have been made, but it has almost the same shape.
This system will not clean all the chips, but at least, it suck the dust away which is good enough.
Some little modifications have been made, but it has almost the same shape.
This system will not clean all the chips, but at least, it suck the dust away which is good enough.
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Dieser Beitrag enthält Bilddateien.
Bitte anmelden (oder registrieren) um sie zu sehen.
Folgende Benutzer bedankten sich: bvps
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- hale2160
-
- Offline
- Forum Nutzer
-
03 Nov 2015 21:35 #26499
von hale2160
SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad
hale2160 antwortete auf New hose holder (at the base of the miller)
Very nice, you are well on your way to a efficient dust shoe. Not sure if this will work
www.toolstation.com/shop/Ironmongery/d170/Draught+Excluders/sd2802/Heavy+Duty+Brush+Strip/p68841
but I might try some. If you can't get this in Holland, let me know and I'll send you some when I get it.
Hal
Hal
SC840, HF500, UCNNC, Vcarve Pro, Turbo Cad
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Denus
-
Autor
- Offline
- Forum Nutzer
-
- Jack of all hobbies, master of none!
03 Nov 2015 21:55 #26500
von Denus
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Denus antwortete auf New hose holder (at the base of the miller)
Well, I don't know if I want to have a "closed" system after all.
I made a shoe in the past, but it wasn't handy after all.
The system I have is working very well: all the volatile dust is vacuumed, and the remains can be removed when the job is done.
I made a shoe in the past, but it wasn't handy after all.
The system I have is working very well: all the volatile dust is vacuumed, and the remains can be removed when the job is done.
Eurotools-24 G-500 & custom-made aluminium table
Kress 800
TB6560 4V3, UC100, UCCNC
Bitte Anmelden oder Registrieren um der Konversation beizutreten.