- Beiträge: 152
- Dank erhalten: 97
Frage
UCCNC new version released
- jvalencia
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
02 Sep 2015 15:15 - 02 Sep 2015 15:16 #24776
von jvalencia
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
UCCNC new version released wurde erstellt von jvalencia
I think I'll keep this thread bumped whenever a new version arrives.
History of versions:
Link to UCCNC site
History of versions:
- v1.1026 (latest)
- v1.1022
- v1.1020Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
Letzte Änderung: 02 Sep 2015 15:16 von jvalencia.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
02 Sep 2015 18:27 #24782
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf UCCNC new version released
Just downloaded and installed this revision.
Seems to be good apart from having had a jogging lock up again.
Used my earlier profiles with no problems.
Peter
Seems to be good apart from having had a jogging lock up again.
Used my earlier profiles with no problems.
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- jvalencia
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 152
- Dank erhalten: 97
23 Sep 2015 14:24 #25236
von jvalencia
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
jvalencia antwortete auf UCCNC new version released
For some reason I can't edit my top comment.
Bumping for new version as of 23 September 2015.
- 1.1027
Bumping for new version as of 23 September 2015.
- 1.1027
Stepcraft 2 840
Kress 800 FME
UCCNC + UC100
V-Carve + QCad
Bitte Anmelden oder Registrieren um der Konversation beizutreten.