- Beiträge: 23
- Dank erhalten: 10
Frage
WINPC-NC USB
- Stuart Mellor
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
07 Okt 2015 17:24 #25666
von Stuart Mellor
WINPC-NC USB wurde erstellt von Stuart Mellor
Hi all,
Recently purchased the above software for my 600 ver 1 for 199 Euros. Really pleased with it. The software is a major improvement on the supplied basic software. Can now use 10 colours (tools). It now has tool dia compensation for each tool, repeat functions, & a host of other useful additions.
I only use 2- 2/12D importing hpgl files from my familiar DOS program (yes!) & this is an excellent program for this application.
Biggest bonus is the tool dia compensation function. Prior to this, I had to redraw my drawing with tool offset lines etc!
Software will also import G code etc as I understand it - but no experience of this.
Recently purchased the above software for my 600 ver 1 for 199 Euros. Really pleased with it. The software is a major improvement on the supplied basic software. Can now use 10 colours (tools). It now has tool dia compensation for each tool, repeat functions, & a host of other useful additions.
I only use 2- 2/12D importing hpgl files from my familiar DOS program (yes!) & this is an excellent program for this application.
Biggest bonus is the tool dia compensation function. Prior to this, I had to redraw my drawing with tool offset lines etc!
Software will also import G code etc as I understand it - but no experience of this.
Folgende Benutzer bedankten sich: bluskies
Bitte Anmelden oder Registrieren um der Konversation beizutreten.