- Beiträge: 2
- Dank erhalten: 0
Frage
UCCNC Plugin for UCR200
20 Dez 2015 18:19 #28372
von peti-digital
Stepcraft 2-840 + T-Nutenplatte
Kress 1050 FME-1
UCCNC + UC100 + UCR200
Inventor - QCAD - Estlcam 8
DL3ABM
peti-digital antwortete auf UCCNC Plugin for UCR200
Hi ... Marco?
I have a UCR200 too running with UCCNC.
I did the following:
1. update software to version 1.1027 (1.1019 will not run).
2. goto CONFIGURATION -> GENERAL SETTINGS -> CONFIGURE PLUGINS
3. select the UCR200 and tick both options
4. save the configuration
5. plug in the UCR200 receiver
6. restart the software
7. have fun
Best Regards,
Peter
I have a UCR200 too running with UCCNC.
I did the following:
1. update software to version 1.1027 (1.1019 will not run).
2. goto CONFIGURATION -> GENERAL SETTINGS -> CONFIGURE PLUGINS
3. select the UCR200 and tick both options
4. save the configuration
5. plug in the UCR200 receiver
6. restart the software
7. have fun
Best Regards,
Peter
Stepcraft 2-840 + T-Nutenplatte
Kress 1050 FME-1
UCCNC + UC100 + UCR200
Inventor - QCAD - Estlcam 8
DL3ABM
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
20 Dez 2015 20:24 #28378
von [email protected]
[email protected] antwortete auf UCCNC Plugin for UCR200
Hi Peter,
now it works great. Many thanks for your valuable information.
Thanks again
Now I enjoy
Best regards
Marco
SC 420/2
HF500
UCCNC for stepcraft
UC100 motion controller
UCR200
now it works great. Many thanks for your valuable information.
Thanks again
Now I enjoy
Best regards
Marco
SC 420/2
HF500
UCCNC for stepcraft
UC100 motion controller
UCR200
Bitte Anmelden oder Registrieren um der Konversation beizutreten.