- Beiträge: 1
- Dank erhalten: 0
Frage
UCCNC and HSMworks
- Rift
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
04 Jan 2016 17:42 #28901
von Rift
UCCNC and HSMworks wurde erstellt von Rift
Hi all
I'm new here and was wondering if anyone out there uses HSMworks as there CAM software? I'm trying to find a post processor that will work with this combination but the only thing I can find is something for 4 axis.
I'm still familiarizing myself with my 840 but was hoping to get a head start on my software challenge.
Thanks in advanced for the help!
I'm new here and was wondering if anyone out there uses HSMworks as there CAM software? I'm trying to find a post processor that will work with this combination but the only thing I can find is something for 4 axis.
I'm still familiarizing myself with my 840 but was hoping to get a head start on my software challenge.
Thanks in advanced for the help!
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MikeRD03
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 372
- Dank erhalten: 174
04 Jan 2016 18:14 #28906
von MikeRD03
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
MikeRD03 antwortete auf UCCNC and HSMworks
If there is a Mach3 postprocessor, try this one. AFAIK UCCNC should be Mach3 compatible.
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
Bitte Anmelden oder Registrieren um der Konversation beizutreten.