- Beiträge: 14
- Dank erhalten: 0
Frage
mach4 software
- clive 23
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
02 Mär 2016 06:02 #31517
von clive 23
mach4 software wurde erstellt von clive 23
i can get mach4 software to work on my stepcraft 
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- peterg1000
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 380
- Dank erhalten: 131
02 Mär 2016 17:14 #31537
von peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
peterg1000 antwortete auf mach4 software
You'll need to tell Mach4 all about your machine - I can't help with details of Mach4 as I use UCCNC.
If you have a UCCNC profile for your machine that will have all the details you require to enter into Mach4, but I'm sure some kind soul will be able to offer you a working profile to download. There a lots of parameters to enter otherwise.
Good luck.
If you have a UCCNC profile for your machine that will have all the details you require to enter into Mach4, but I'm sure some kind soul will be able to offer you a working profile to download. There a lots of parameters to enter otherwise.
Good luck.
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- MikeRD03
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 372
- Dank erhalten: 174
02 Mär 2016 19:43 #31543
von MikeRD03
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
MikeRD03 antwortete auf mach4 software
I doubt it will work. AFAIK Mach4 only talks to USB machines and the Stepcraft USB interface is WinNC only. Perhaps with a UC100 adapter..
SC M.500 | 2,2kW Spindel G-Penny | Mach4 über Ethernet Smoothstepper
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Baumberger
-
- Offline
- Forum Nutzer
-
02 Mär 2016 21:18 #31550
von Baumberger
Gruss Daniel
Baumberger-Tech
www.baumberger-te.ch
Baumberger antwortete auf mach4 software
Hello clive 23
i 've written along with a nice guy a guide for Mach4 together with the ethernet smooth stepper . Sadly only in German. But with many images . I hope that benefits you something.
http://www.baumberger-te.ch/attachments/File/docs/Stepcraft_mit_Mach4_und_SmoothStepper.doc
i 've written along with a nice guy a guide for Mach4 together with the ethernet smooth stepper . Sadly only in German. But with many images . I hope that benefits you something.
http://www.baumberger-te.ch/attachments/File/docs/Stepcraft_mit_Mach4_und_SmoothStepper.doc
Gruss Daniel
Baumberger-Tech
www.baumberger-te.ch
Folgende Benutzer bedankten sich: Joules
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- clive 23
-
Autor
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 14
- Dank erhalten: 0
03 Mär 2016 10:55 #31556
von clive 23
clive 23 antwortete auf mach4 software
I use PMDX-411 smartBOB -USB still can't get my machine to work
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Calleja
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 41
- Dank erhalten: 20
19 Mai 2016 18:27 #34263
von Calleja
Stepcraft 2 430
Kress 800 FME
UCCNC + UC100
Cut2D Desktop
Calleja antwortete auf mach4 software
Hello to everybody. I am completely new in CNC world. I just made an order for S2 /420 model with basic USB WinPC. I have a laptop with Win 10 and of course with USB ports only. My question is, can Mach 4 communicate with the USB interface port that come with the CNC ?
Stepcraft 2 430
Kress 800 FME
UCCNC + UC100
Cut2D Desktop
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Nonaga
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 99
- Dank erhalten: 18
19 Mai 2016 22:50 #34273
von Nonaga
SC 840, WinPC-Vollversion, HF500
Grüße von der Wasserkuppe.
Nonaga antwortete auf mach4 software
@Calleja
You wrote: I just made an order for S2 /420 model with basic USB WinPC.
Hello and for short...
"Winpc Controller Card" works with "Winpc Software" via USB.
"Mach4 Controller Card" works with "Mach4 Software" via USB.
... and so on (Controler & Software must work together) via connection.
You can change "basic USB WinPC" Controlercard (Feel free to ask Mr. Lewetz).
You wrote: I just made an order for S2 /420 model with basic USB WinPC.
Hello and for short...
"Winpc Controller Card" works with "Winpc Software" via USB.
"Mach4 Controller Card" works with "Mach4 Software" via USB.
... and so on (Controler & Software must work together) via connection.
You can change "basic USB WinPC" Controlercard (Feel free to ask Mr. Lewetz).
SC 840, WinPC-Vollversion, HF500
Grüße von der Wasserkuppe.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- AlanUK
-
- Offline
- Forum Nutzer
-
20 Mai 2016 12:11 #34287
von AlanUK
SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360
AlanUK antwortete auf mach4 software
Hi,
have just purchased a 600, but not yet assembled so have not used any software.
Regarding Mach3/4, there is a lot of information on the StoneyCNC website on setting up Mach3, (and on UCCNC) not sure how Mach4 differs and I will be using UCCNC but the information should be of help, also has video's.
stoneycnc.co.uk/stepcraft-software/stepcraft-software-with-mach3-control/
Hope this helps
Alan
have just purchased a 600, but not yet assembled so have not used any software.
Regarding Mach3/4, there is a lot of information on the StoneyCNC website on setting up Mach3, (and on UCCNC) not sure how Mach4 differs and I will be using UCCNC but the information should be of help, also has video's.
stoneycnc.co.uk/stepcraft-software/stepcraft-software-with-mach3-control/
Hope this helps
Alan
SC600/2, Kress 1050, UCCNC with UC100, Cut2D Pro, TurboCAD and Fusion 360
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Calleja
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 41
- Dank erhalten: 20
20 Mai 2016 17:49 #34297
von Calleja
Stepcraft 2 430
Kress 800 FME
UCCNC + UC100
Cut2D Desktop
Calleja antwortete auf mach4 software
@ Nonaga : Of course i will upgrade my system to run under Mach 3/4 or UCCNC. Correct me if i'm wrong ; if i opt for Mach3/4 i have to purchase an interface PCB board togheter with UC 100 controller and a parallel port for my CNC device . Likewise if i opt for UCCNC i have to purchase an interface board for it as well.
@ AlanUk
Great link and great explanation about Mach 3 installation.
@ AlanUk
Great link and great explanation about Mach 3 installation.
Stepcraft 2 430
Kress 800 FME
UCCNC + UC100
Cut2D Desktop
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- Rory
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 383
- Dank erhalten: 147
22 Mai 2016 14:21 #34326
von Rory
Rory antwortete auf mach4 software
you need a controller that supports Mach4 to use Mach4.
Currently there are a lot of solutions for Mach3..
how much are guys getting a Mach4 license for our of interest?
€€€'s?
Currently there are a lot of solutions for Mach3..
how much are guys getting a Mach4 license for our of interest?
€€€'s?
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
- JAE-YOUNG CHO
-
- Offline
- Forum Nutzer
-
Weniger
Mehr
- Beiträge: 3
- Dank erhalten: 0
01 Jul 2016 15:18 - 01 Jul 2016 15:48 #35411
von JAE-YOUNG CHO
JAE-YOUNG CHO antwortete auf mach4 software
To clive 23
Hi did you solve the problem?
I solve the problem.
My machine run with mach 4
I am using a parallel port <---literally a parallel port.
with the darwin plugin. (XP/LPT1/0X378)
If you have PMDX-411, you machine would work w/o the plugin.
I want to hear what did you do and share what's going on.
Hi did you solve the problem?
I solve the problem.
My machine run with mach 4
I am using a parallel port <---literally a parallel port.
with the darwin plugin. (XP/LPT1/0X378)
If you have PMDX-411, you machine would work w/o the plugin.
I want to hear what did you do and share what's going on.
Letzte Änderung: 01 Jul 2016 15:48 von JAE-YOUNG CHO.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.