Last seen: Feb 16, 2019
@hasew I do recall when assembling my X axis that I has to have a couple of attempts because the X axis rail which is over 600mm long it had twisted. ...
I'm still waiting for news. I don't have a date yet. peterg1000, could be, but it makes it quite sensitive do get the "proper adjustment". While i...
Sorry to disagree here - if the machine is properly adjusted there is adequate power in the standard motors. I can achieve slew rates of over 3000mm/m...
Answer is no. The good news is that since I published my mod, Stepcraft got in touch and they will release an upgrade pack with a new control unit and...
I have just had to get new Y axis aluminium sides and rollers because the aluminium became pitted when some debris fell through the rubber seal. I cle...
I never got the screenset. I ended us using the 2017 screenset and it works great.
The link to the multi installer does not work anymore. Do you have an updated link
I got my stepcraft before the laser module was released and promptly made my own. Works great. As for finding second hand stepcraft machines, highly u...
Have you tried with laser connected directly to the Stepcraft, bypassing the switch box?