yup - Illustrator is an excellent package - but expensive. VcarvePro can do almost all the vector based modelling shapes that one would need for C...

Cut2D cut2D loads all the fonts on the >> windows >> fonts folder. Cut2D allows you to directly generate geometry for the machine - an...

Looks great. a larger Vcutter will help with time and also the over all finish. you can get larger diam V's with 3.125mm shanks. works a lot bette...

The main motivation is to lubricate without attracting dirt / crud and swarf. sounds good guys.

You need the macros too. otherwise the A axix will not zero itself when you run - watch this. Its a b*** to reset the printer head and get the f...

Notice here with the table that not all the holes are covered. The holes in the table start out a approx 6mm and then reduce down to 0.2mm. This allo...

Rob - did you email us? We had an issue replying to an email a few days ago... Glad you like the video. Please let us know if anything is not clear...

Thanks for your message. Please share the 3D relief work you are doing? We would love to see!! The UC100 USB motion controller is a 6 axis controller....

Santa?

Maybe somebody should try to stop you ... 😛 😛 😛 😉 Man and Stepcraft... No stopping this

Anything to avoid tool changes! We don't like tool changes!!

Currently making on for machine with 1300 x 900mm travel out of 38mm MDF. When its finished will use the vacuum table to make tables for STEPCRAFT...

Super! Looks great. Nice use of staggered clamping too !!