To cofirm - this is a calibration issue. You need to calibrate the machine so it sees 10units (inches) as inches. You need to use the calibration func...

Well done for configuring the machine with Mach3. It is not easy. We (StoneyCNC) give the full profile out with the machines we offer - so its simply ...

It depends on the application. And how you use the machine. We have some great examples of work carried out with the proxxon and Dremel from people wi...

There are two versions of WinPC for the STEPCRAFT machines. WinPC starter is the standard offering and it provides a user friendly interface with ...

WinPC-NCStarter-Howtoinstallthedriversuccessfully.pdf Hello teknik, I don't know if this will help you or not but you could give it a try. A...

You need the STEPCRAFT machine configured with an LPT card - not with the WinPC cards.. The WinPC modules will not allow you to talk to Mach3. Once yo...

On wheels tooo 🙂 Nice!

We will make a video of an application like in your video in the next week or 2. We need to wait to get our new HF spindles before we can do this. It ...

Marco - We represent StoneyCNC and the UK/Irish point of contact for STEPCRAFT. We currently support the system with Mach3 and soon the UCCNC. More i...

Cool! Sometimes the finish can be better if you machine down in steps. So machine at steps of 0.5/1mm deep at a time and machine a little quicker. It ...

Welcome to the Forum Blann. Thanks for your post and we hope you have fun with your machine.