- Posts: 122
- Thank you received: 91
Question
Adapter for HXKJ-GS52-400W Spindle
- Mr. B
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
22 May 2015 18:57 - 22 May 2015 19:01 #21142
by Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
This message has attachments images.
Adapter for HXKJ-GS52-400W Spindle was created by Mr. B
Adapter for
HXKJ-GS52-400W
Air cooled DC spindle
Voltage DC48V
Speed 12000RPM
Material: Aluminium
M4x40 Socket head cap screws stainless steel (x3)
HXKJ-GS52-400W Spindle
HXKJ-GS52-400W
Air cooled DC spindle
Voltage DC48V
Speed 12000RPM
Material: Aluminium
M4x40 Socket head cap screws stainless steel (x3)
HXKJ-GS52-400W Spindle
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
This message has attachments images.
Please log in or register to see it.
Last edit: 22 May 2015 19:01 by Mr. B.
The following user(s) said Thank You: Pyromane
Please Log in or Create an account to join the conversation.
- Mr. B
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 122
- Thank you received: 91
23 May 2015 13:02 - 23 May 2015 13:04 #21164
by Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
This message has attachments images.
This message has an attachment file.
Replied by Mr. B on topic Adapter for HXKJ-GS52-400W Spindle
Please see PDF file with dimensions attached below
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
This message has attachments images.
Please log in or register to see it.
This message has an attachment file.
Please log in or register to see it.
Last edit: 23 May 2015 13:04 by Mr. B.
The following user(s) said Thank You: Rory, bvs, manuelgrub
Please Log in or Create an account to join the conversation.
- speedo
-
- Offline
- Forum Nutzer
-
- 420v1 / Sorotec Vakuumtisch / EstlCAM+CNC
23 May 2015 16:41 #21179
by speedo
Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
Replied by speedo on topic Adapter for HXKJ-GS52-400W Spindle
Looks great, pretty tight fit 
. How about the noise? Is the low RPM a problem (compared to the 20.000 of the proxxon)?
. How about the noise? Is the low RPM a problem (compared to the 20.000 of the proxxon)? Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
The following user(s) said Thank You: Mr. B
Please Log in or Create an account to join the conversation.
- Mr. B
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 122
- Thank you received: 91
23 May 2015 21:17 - 23 May 2015 21:18 #21196
by Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Replied by Mr. B on topic Adapter for HXKJ-GS52-400W Spindle
It is a bit of a squeeze to get in but could always make a replacement extended tool holder to remedy that.
I've run it 3/4 to max and it's very quite compared to the proxxon.
For the moment cutting oak it's been great.
Also the driver that comes with it has an out put to connect to PWM on mach3. (I've not done this yet though).
For £115 and the ability to hold up to a 7mm cutter I thought I'd give it a go. So far very happy.
I've run it 3/4 to max and it's very quite compared to the proxxon.
For the moment cutting oak it's been great.
Also the driver that comes with it has an out put to connect to PWM on mach3. (I've not done this yet though).
For £115 and the ability to hold up to a 7mm cutter I thought I'd give it a go. So far very happy.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Last edit: 23 May 2015 21:18 by Mr. B.
The following user(s) said Thank You: speedo
Please Log in or Create an account to join the conversation.
- speedo
-
- Offline
- Forum Nutzer
-
- 420v1 / Sorotec Vakuumtisch / EstlCAM+CNC
24 May 2015 19:07 #21239
by speedo
Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
Replied by speedo on topic Adapter for HXKJ-GS52-400W Spindle
Hey blanthegenius,
one more question: whats the weight of the system (motor + adapter)?
I was watching a auction at eBay but it seems this professional grade motor (max. rmp 30.000) might be worth a consideration.
one more question: whats the weight of the system (motor + adapter)?
I was watching a auction at eBay but it seems this professional grade motor (max. rmp 30.000) might be worth a consideration.
Daniel
zenziwerken.de « dxf-downloads von kreativen Projekten
cnc-wiki.de « lesen ... lernen ... fräsen
The following user(s) said Thank You: Mr. B
Please Log in or Create an account to join the conversation.
- Mr. B
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 122
- Thank you received: 91
24 May 2015 19:29 #21243
by Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Replied by Mr. B on topic Adapter for HXKJ-GS52-400W Spindle
Hello Speedo,
The weight of the motor plus adapter is:
1.1 Kg or 2.42 lbs
The weight of the motor plus adapter is:
1.1 Kg or 2.42 lbs
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
The following user(s) said Thank You: speedo
Please Log in or Create an account to join the conversation.
- Mr. B
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 122
- Thank you received: 91
24 May 2015 19:34 #21244
by Mr. B
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Replied by Mr. B on topic Adapter for HXKJ-GS52-400W Spindle
That looks like a belter,
If you do get this one let me know how you get on with it please.
If you do get this one let me know how you get on with it please.
Stepcraft 420 (version 1) - HXKJ-GS52-400W Air cooled DC spindle - 445nm Blue Laser diode G2
Please Log in or Create an account to join the conversation.