- Posts: 2
- Thank you received: 0
Question
USB B port
- doncraig
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
21 Nov 2019 21:07 #57667
by doncraig
USB B port was created by doncraig
I have fitted the daughterboard with the USB B port in place of the original Parallel (LPT1) port to my Stepcraft 420 but the machine won't work. How can I get it to work ?? please
Don W
Don W
Please Log in or Create an account to join the conversation.
- Rahul
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 569
- Thank you received: 122
05 Dec 2019 09:13 #57725
by Rahul
Fräse: SC 2/840 USB,Proxxon IBS/E STEPCRAFT HF-500, Werkzeugwechsler + WZLS + T-Nutentisch
3D-Drucker: MendelMax 1.5
CAD: Designspark Mechanical, Eagle
CAM: Estlcam V9, DeskProto
Replied by Rahul on topic USB B port
What does your device manager say?
Does he recognize the interface?
Does he recognize the interface?
Fräse: SC 2/840 USB,
3D-Drucker: MendelMax 1.5
CAD: Designspark Mechanical, Eagle
CAM: Estlcam V9, DeskProto
Please Log in or Create an account to join the conversation.
- doncraig
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 2
- Thank you received: 0
05 Dec 2019 19:28 #57727
by doncraig
Replied by doncraig on topic USB B port
Thanks for your interest. I have replaced this port and put the original parallel port back in place and have it running with a new UC100 and a new UCCNC software package supplied by StoneyCNC.
I am present trying to get the tool height probe to work with no success.
Thanks again.
Don W
I am present trying to get the tool height probe to work with no success.
Thanks again.
Don W
Please Log in or Create an account to join the conversation.