- Posts: 24
- Thank you received: 8
Question
Dressing V cutters.
- badgersurfer
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
11 Aug 2016 01:29 #36546
by badgersurfer
Dressing V cutters. was created by badgersurfer
Does anyone dress their own 2mm up cut end mills, 3mm up cut end mills, V bits. If so what do you use? I am mostly interested in dressing the V bits at the moment?
regards
regards
Please Log in or Create an account to join the conversation.
- peterg1000
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 380
- Thank you received: 131
11 Aug 2016 09:37 #36550
by peterg1000
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Replied by peterg1000 on topic Dressing V cutters.
Hi,
Take a look at this link - it discouraged me from attempting to recover ruined tools, even "full sized" ones.
Peter
Take a look at this link - it discouraged me from attempting to recover ruined tools, even "full sized" ones.
Peter
SC 420/2, Industrial VFD spindle from StoneyCNC
UC100 + UCCNC
Cut2D, Autosketch10, Draftsight, Eagle 9.5.1
There is no problem, however simple, that cannot be made more complicated by thinking about it.
Please Log in or Create an account to join the conversation.