- Posts: 10
- Thank you received: 0
Question
USB LED OFF But WINPCNC seems fine....???
- karibeanbongos
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
10 Feb 2017 17:03 - 10 Feb 2017 17:39 #44058
by karibeanbongos
USB LED OFF But WINPCNC seems fine....??? was created by karibeanbongos
Hi! I finished to assemble my SC840 and I'm running WinPC NC on a Mac using Parallel Desktop with WIN7
the power led are on, but USB not, Windows 7 see the USB Lewetz but WinPC NC not.....any suggestion?
I'm not used to work on Windows, so what should I do now?
is a software or hardware problem ?
also, if it can help, my laptop is a 15inch macbook pro, 2.2ghz intel core 2 duo, osx 10.8.5
the power led are on, but USB not, Windows 7 see the USB Lewetz but WinPC NC not.....any suggestion?
I'm not used to work on Windows, so what should I do now?
is a software or hardware problem ?
also, if it can help, my laptop is a 15inch macbook pro, 2.2ghz intel core 2 duo, osx 10.8.5
Last edit: 10 Feb 2017 17:39 by karibeanbongos.
Please Log in or Create an account to join the conversation.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 224
- Thank you received: 81
11 Feb 2017 10:18 - 11 Feb 2017 10:19 #44109
by CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Replied by CNCMiller on topic USB LED OFF But WINPCNC seems fine....???
Hello Kari...,
first of all you shout connect the usb cable and power on your steppie before you start up winpc-nc, else you won't get connected.
if that doesn't fix your problem, try to connect your usb cable to for instance a printer for testing the connectivity in your windows emulator.
Another thing is that windows can turn off your usb port, especially on laptops which are in battery mode. this is set in the power saving options of windows. set that parameter on always stay connected or disable the function. you can find that in advanced power setting-USB settings-setting for USB interruption.
good luck
first of all you shout connect the usb cable and power on your steppie before you start up winpc-nc, else you won't get connected.
if that doesn't fix your problem, try to connect your usb cable to for instance a printer for testing the connectivity in your windows emulator.
Another thing is that windows can turn off your usb port, especially on laptops which are in battery mode. this is set in the power saving options of windows. set that parameter on always stay connected or disable the function. you can find that in advanced power setting-USB settings-setting for USB interruption.
good luck
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Last edit: 11 Feb 2017 10:19 by CNCMiller.
The following user(s) said Thank You: karibeanbongos
Please Log in or Create an account to join the conversation.
- MagIO2
-
- Offline
- Forum Nutzer
-
- Zu viele Ideen und zu wenig Zeit
Less
More
- Posts: 2607
- Thank you received: 791
12 Feb 2017 23:34 - 12 Feb 2017 23:36 #44217
by MagIO2
SC 420 mit DIY parallel +Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
Replied by MagIO2 on topic USB LED OFF But WINPCNC seems fine....???
Wasn't there a request for the english version of the manual??? Deleted??? Anyway .. have a look here:
Manuals
Manuals
SC 420 mit DIY parallel +
Gruß, Andreas
Last edit: 12 Feb 2017 23:36 by MagIO2.
The following user(s) said Thank You: karibeanbongos
Please Log in or Create an account to join the conversation.
- karibeanbongos
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 10
- Thank you received: 0
14 Feb 2017 12:54 #44318
by karibeanbongos
Replied by karibeanbongos on topic USB LED OFF But WINPCNC seems fine....???
i requested an english version but right after i found it...that's why, but thank u very much for the interest
Please Log in or Create an account to join the conversation.