Question What bit for rounding the edges?

Start
Prev
1
Next
End

julius
Topic Author
Offline
Forum Nutzer

06 Aug 2015 18:41 #24091 by julius

What bit for rounding the edges? was created by julius

Where to buy (in Germany) an end-mill to round the edges of a box made of POM?
I would like to donate a better look at my small box. A 2 or 3 mm rounded profile would be nice but I didn't find any vendor of such bits.
Any idea?

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

This message has an attachment image.
Please log in or register to see it.

Please Log in or Create an account to join the conversation.

Mogul
Offline
Forum Nutzer
MF70 CNC und SC-1/416 ;-) mit Mach3

06 Aug 2015 18:59 #24092 by Mogul

Replied by Mogul on topic What bit for rounding the edges?

Hello Julius,
you need a "Viertelkreisfräser" and for POM is HSS good enough.
In Germany you will find many dealers if you are serching about this term.

Gruß
Helmut

Please Log in or Create an account to join the conversation.

julius
Topic Author
Offline
Forum Nutzer

06 Aug 2015 20:43 #24094 by julius

Replied by julius on topic What bit for rounding the edges?

Mogul wrote: Hello Julius,
you need a "Viertelkreisfräser" and for POM is HSS good enough.
In Germany you will find many dealers if you are serching about this term.

Gruß
Helmut

jaaaaa! Gefunden! Danke Helmut!

Sorotec has a quite good choice: http://www.sorotec.de/shop/Zerspanungswerkzeuge/Entgrater---Senker/Viertelkreisfraeser/

SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

choose your language

Question What bit for rounding the edges?

This message has an attachment image. Please log in or register to see it.

This message has an attachment image.
Please log in or register to see it.