- Posts: 1
- Thank you received: 8
Question
Fairly complex shape using free software
19 Feb 2016 18:53 #30845
by MarkLeeds2K5
This message has attachments images.
Fairly complex shape using free software was created by MarkLeeds2K5
This was a little test to see what I could do without buying any software.
The shape was designed in Inkscape, converted to a 3D model in Blender, toolpaths created in Fusion 360, GCODE sent using Universal GCODE Sender, and stepcraft controlled by an arduino running GRBL. That's all free (except the arduino which was about £
.
It's only a bit of MDF, but I'm pretty pleased with the result.
Took about 1 hour 15 minutes to make.
The shape was designed in Inkscape, converted to a 3D model in Blender, toolpaths created in Fusion 360, GCODE sent using Universal GCODE Sender, and stepcraft controlled by an arduino running GRBL. That's all free (except the arduino which was about £
.It's only a bit of MDF, but I'm pretty pleased with the result.
Took about 1 hour 15 minutes to make.
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
25 Mar 2016 19:26 - 25 Mar 2016 19:26 #32488
by julius
SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Replied by julius on topic Fairly complex shape using free software
I don't know what is it but... nice! 
Nothing is like the satisfaction after your work is done.
Nothing is like the satisfaction after your work is done.
SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Please Log in or Create an account to join the conversation.