- Posts: 53
- Thank you received: 68
Question
Laser DL445 EN
- jeyb
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
21 Apr 2017 21:53 #46556
by jeyb
Laser DL445 EN was created by jeyb
Hi did anyone test the new laser 2watt?
Please Log in or Create an account to join the conversation.
- bmartens
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 46
- Thank you received: 12
20 Oct 2017 02:51 #50910
by bmartens
Replied by bmartens on topic Laser DL445 EN
Old thread, but yep. Check out the laser section of this forum.
It does some things quite well. My main challenge is learning the ideal parameters for different materials (focussing mainly on marking so far, rather than cutting), and then using more challenging programs such as fusion 360 with it.
(VCarve desktop works pretty well using it as a custom end-mill, and the laser post-processor)
It does some things quite well. My main challenge is learning the ideal parameters for different materials (focussing mainly on marking so far, rather than cutting), and then using more challenging programs such as fusion 360 with it.
(VCarve desktop works pretty well using it as a custom end-mill, and the laser post-processor)
The following user(s) said Thank You: jeyb
Please Log in or Create an account to join the conversation.