Question help me uccnc stepcraft 300 and artcam 2011

Start
Prev
1
Next
End

carlor
Topic Author
Offline
Forum Nutzer

24 Aug 2017 18:19 #49840 by carlor

help me uccnc stepcraft 300 and artcam 2011 was created by carlor

Use artcam 2011 to create 3D toolpaths in which format do i have to save the g code to open it properly with UCCNC?
I have tried some formats, such as g code mm .tpa, but the work does not come in real size but bigger.

Please Log in or Create an account to join the conversation.

carlor
Topic Author
Offline
Forum Nutzer

24 Aug 2017 21:31 #49850 by carlor

Replied by carlor on topic help me uccnc stepcraft 300 and artcam 2011

Please help me

Please Log in or Create an account to join the conversation.

bvs
Offline
Forum Nutzer

24 Aug 2017 21:49 #49851 by bvs

Replied by bvs on topic help me uccnc stepcraft 300 and artcam 2011

hello Carlor
it locks like the wrong scale
You can change setting to milimeter or english unit.

( seeems that all the english fellows are in vacation...)

best wishes
Bruno

Please Log in or Create an account to join the conversation.

carlor
Topic Author
Offline
Forum Nutzer

24 Aug 2017 23:49 #49852 by carlor

Replied by carlor on topic help me uccnc stepcraft 300 and artcam 2011

Thank you very much Bruno. Where I can change it in uccnc 100. Are you Italian? I am from Rome

Please Log in or Create an account to join the conversation.

bvs
Offline
Forum Nutzer

25 Aug 2017 06:44 #49854 by bvs

Replied by bvs on topic help me uccnc stepcraft 300 and artcam 2011

Non sono italiano

You must search for it!
Normaly settings change can be done in the capter "settings"

Habe a nice day
Bruno

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

choose your language

Question help me uccnc stepcraft 300 and artcam 2011