- Posts: 5
- Thank you received: 0
Question
Recommended Post Processor for stepcraft 840
- hatemabugameh
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
23 Feb 2018 17:26 #52938
by hatemabugameh
Recommended Post Processor for stepcraft 840 was created by hatemabugameh
Hello.
I have aspire 9, what the recommended post processer for stepcraft? G-CODE or Mach2_3-Arcs_mm?
I have aspire 9, what the recommended post processer for stepcraft? G-CODE or Mach2_3-Arcs_mm?
Please Log in or Create an account to join the conversation.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 224
- Thank you received: 81
24 Feb 2018 10:48 #52946
by CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Replied by CNCMiller on topic Recommended Post Processor for stepcraft 840
Hello
that depends on wich software your machine is working, You use UCCNC or WINPC-NC?
For WinPC-NC, use WinPC-NC ATC Arcs mm (*.nc) for 2, 2.5 and 3D milling.
I don't know the UCCNC post processor.
good luck
that depends on wich software your machine is working, You use UCCNC or WINPC-NC?
For WinPC-NC, use WinPC-NC ATC Arcs mm (*.nc) for 2, 2.5 and 3D milling.
I don't know the UCCNC post processor.
good luck
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Please Log in or Create an account to join the conversation.