- Posts: 16
- Thank you received: 1
Question
Postprocessor for SCraft in Aspire 9.-
- Alexxfx
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
05 May 2018 22:11 - 05 May 2018 22:14 #53679
by Alexxfx
Postprocessor for SCraft in Aspire 9.- was created by Alexxfx
That is an old boring theme about SC PostProcesor.
That's why I was really happy to see attached PProcessor in Aspire 9.011.
Wanted to ask if someone used this PProcessor in practice?
If you need to invert Z-axe as it was always?
Thanx
That's why I was really happy to see attached PProcessor in Aspire 9.011.
Wanted to ask if someone used this PProcessor in practice?
If you need to invert Z-axe as it was always?
Thanx
Last edit: 05 May 2018 22:14 by Alexxfx.
Please Log in or Create an account to join the conversation.
- frankjoke
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 267
- Thank you received: 95
05 May 2018 22:26 #53680
by frankjoke
Frank
Steppcraft 600/2 + HF500 + SwitchBox + Laser + Schleppmesser
Absaugung und Vakuumtisch
an Mach3 oder UCCNC mit Taster für Z-Null und Werkzeuglänge
Replied by frankjoke on topic Postprocessor for SCraft in Aspire 9.-
You need to be a bit more specific for which program you need the post processor. I used the ones for Mach and UCCNC and it worked well, I still remember that in WinPC.. (I forgot about the exact name) I had to change some settings in WinPC.
p.s.: At the moment I use the UCCNC withouit problems.
p.s.: At the moment I use the UCCNC withouit problems.
Frank
Steppcraft 600/2 + HF500 + SwitchBox + Laser + Schleppmesser
Absaugung und Vakuumtisch
an Mach3 oder UCCNC mit Taster für Z-Null und Werkzeuglänge
Please Log in or Create an account to join the conversation.