- Posts: 3
- Thank you received: 0
Question
Not going to Home Position
- shrinivas2001
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
30 May 2018 14:58 #53844
by shrinivas2001
Not going to Home Position was created by shrinivas2001
Stepcraft 840.
No movement in any axis when trying to move in any axis (X, Y or Z). Machine is powered on. Can feel power in all motors but no movement when clicking on "home all or zero all". Unable to move manually using jog (jog feed increased up to 80%) in any direction
Current position is away from limit switch.
No movement in any axis when trying to move in any axis (X, Y or Z). Machine is powered on. Can feel power in all motors but no movement when clicking on "home all or zero all". Unable to move manually using jog (jog feed increased up to 80%) in any direction
Current position is away from limit switch.
Please Log in or Create an account to join the conversation.
- shrinivas2001
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
- Posts: 3
- Thank you received: 0
30 May 2018 15:53 #53845
by shrinivas2001
Replied by shrinivas2001 on topic Not going to Home Position
Solved by changing correct profile (Default to Stepcraft 2_Model 840)
Please Log in or Create an account to join the conversation.