Question scale problem in win pcnc usb

hi all
i have upgrade my winpc nc starter to usb and finaly manage to run gcode files
the problem is that the dimentiones are not as in the gcode
i made 50 mm square and the machine milled 80 mm square
the version of my software is 3.00/48
the gcode i used is
G21 G90 G40

(profile 1)
G0 Z30
T0 M6
G17
M3
G0 X10 Y60.
G1 Z-0.7 F200
G1 X10 Y10 F200
G1 X60 Y10
G1 X60 Y60
G1 X10 Y60
G0 Z30
M5
M30

thank you

Hi Yoelba,

Did you loaded the correct machine type profile in WinPC-NC. This is option menu when you for the first time start WinPC.

thank you for your replay
I suspected this was the issue but didn't find where to change the model
how can I modify machine type
is there difference between Stepcraft 600 and Stepcraft 2 600 (screw pitch maybe? )

Hi again,

Open WinPC and go to tab settings go to the last item on the submenu "open".
This opens your explorer in the folder of winpc, here you can choose whits profile *.wpi (machine type) you want to use, select one and press "open"

Thats all

hi
could not find TAB SETTING
All i have is :
File , Move ,Parameters , Special functions , Help

Ok

I mean tab "parameters" in mine translation it is setting that why.

THANK YOU
it worked
I loaded the correct WPI file and the scale issue is solved

thank again

great,
have fun with your steppie