- Posts: 2
- Thank you received: 0
Question
I Cant understand what is wrong with the SAFE Z
- AIdesign
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
31 Jul 2023 13:34 #63288
by AIdesign
This message has attachments images.
I Cant understand what is wrong with the SAFE Z was created by AIdesign
Hi
I know it will probably be a basic thing, but my head is already in water!
When executing the job, when changing from one line to start another activates the e-stop!
It's always on the "Z".
You can help me!
I'm using a SETPCRAFT M700 and VCRAVE PRO
I know it will probably be a basic thing, but my head is already in water!
When executing the job, when changing from one line to start another activates the e-stop!
It's always on the "Z".
You can help me!
I'm using a SETPCRAFT M700 and VCRAVE PRO
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
- Steinke
-
- Offline
- Moderator
-
Less
More
- Posts: 4
- Thank you received: 0
31 Jul 2023 14:32 #63289
by Steinke
Replied by Steinke on topic I Cant understand what is wrong with the SAFE Z
I see the command G00Z15. In line 1620. change this line to a smaller value e.g. 5mm. The Z-axis tries to execute this command and moves up against the limit switch and thus triggers the emergency stop. Your team from Stepcraft. If you have any further questions, please do not hesitate to contact us.
Please Log in or Create an account to join the conversation.