- Posts: 19
- Thank you received: 0
Question
Winpc nc / Vcarvepro multiple toolpaths
- hassage
-
Topic Author
- Offline
- Forum Nutzer
-
Less
More
16 Dec 2017 11:43 #51677
by hassage
Winpc nc / Vcarvepro multiple toolpaths was created by hassage
Hi guys,
I'm trying to export two tools paths from vcarve pro to winpc-nc.
But when I open the file in. Winpc-nc the file shows both tool paths as one.
Am I exporting wrong from vcarve or am I missing something in winpc-nc.
Thanks
K
I'm trying to export two tools paths from vcarve pro to winpc-nc.
But when I open the file in. Winpc-nc the file shows both tool paths as one.
Am I exporting wrong from vcarve or am I missing something in winpc-nc.
Thanks
K
Please Log in or Create an account to join the conversation.
- CNCMiller
-
- Offline
- Forum Nutzer
-
Less
More
- Posts: 224
- Thank you received: 81
16 Dec 2017 19:40 - 16 Dec 2017 19:40 #51679
by CNCMiller
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Replied by CNCMiller on topic Winpc nc / Vcarvepro multiple toolpaths
make sure you have two toolnumbers in the file.
eq. path one toolnr 1, path two toolnr 2
and save both paths to one file
that should work
eq. path one toolnr 1, path two toolnr 2
and save both paths to one file
that should work
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Last edit: 16 Dec 2017 19:40 by CNCMiller.
Please Log in or Create an account to join the conversation.