- Beiträge: 3
- Dank erhalten: 0
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
This is my tool changer in action:pablo0515 schrieb: I'm a cnc/stepcraft newbie looking at stepcraft products and remain with some questions, I hope some more experienced user can give me some feedback:
I'm looking at the 2/600 or 2/840 using the HF Spindle and the automatic tool changer.
- To avoid dust all over the place, could I add and use the exhaust adapter in combination with the automatic tool changer?
Stepcraft's tool holders accept shaft diameters of 1/4", 1/8" or 2/16". If the milling tools used by datron provide one of theses diameters the can be uses with the stepcraft.pablo0515 schrieb: - To get a polished effect on the sides of acrylic/plexiglass milling, I saw a datron.de video (link: www.datron.com/tools/acrylic-tools.php ), making a beautifull part with really smooth edges. The story tells, that they accomplished this using their specific endmills. Can those tools also be used on the StepCraft, and would it also be possible to get comparable result using StepCraft?
In case the stepcraft is able to turn and move the milling tool in equivalent matter it should be possible.pablo0515 schrieb: - Could the threading in acrylic also be made (as in the video link above) using stepcraft?
pablo0515 schrieb:
Thanks very much in advance ...
ps I'm not certain in which forum category this post fits ... I hope it's fine here.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Bitte Anmelden oder Registrieren um der Konversation beizutreten.
Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.