Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
8
Beiträge
2
Benutzer
0
Likes
3,747
Ansichten
Themenstarter
hi all
i have upgrade my winpc nc starter to usb and finaly manage to run gcode files
the problem is that the dimentiones are not as in the gcode
i made 50 mm square and the machine milled 80 mm square
the version of my software is 3.00/48
the gcode i used is
G21 G90 G40
(profile 1)
G0 Z30
T0 M6
G17
M3
G0 X10 Y60.
G1 Z-0.7 F200
G1 X10 Y10 F200
G1 X60 Y10
G1 X60 Y60
G1 X10 Y60
G0 Z30
M5
M30
thank you
Veröffentlicht : 10/06/2018 6:45 pm
Hi Yoelba,
Did you loaded the correct machine type profile in WinPC-NC. This is option menu when you for the first time start WinPC.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 11/06/2018 11:23 am
Themenstarter
thank you for your replay
I suspected this was the issue but didn't find where to change the model
how can I modify machine type
is there difference between Stepcraft 600 and Stepcraft 2 600 (screw pitch maybe? )
Veröffentlicht : 11/06/2018 1:15 pm
Hi again,
Open WinPC and go to tab settings go to the last item on the submenu "open".
This opens your explorer in the folder of winpc, here you can choose whits profile *.wpi (machine type) you want to use, select one and press "open"
Thats all
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 11/06/2018 4:40 pm
Themenstarter
hi
could not find TAB SETTING
All i have is :
File , Move ,Parameters , Special functions , Help
Veröffentlicht : 11/06/2018 4:53 pm
Ok
I mean tab "parameters" in mine translation it is setting that why.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 11/06/2018 5:21 pm
Themenstarter
THANK YOU
it worked
I loaded the correct WPI file and the scale issue is solved
thank again
Veröffentlicht : 11/06/2018 5:39 pm
great,
have fun with your steppie
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 11/06/2018 8:49 pm
