Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Accessories
1
Beiträge
1
Benutzer
0
Likes
3,847
Ansichten
Themenstarter
I suspect that the mini live centre supplied with the 4th axis tailstock is not going to be robust enough for my desired application (rotation of a piece of hardwood timber approximately 800 x 80 x 40 mm & 1.5 to 1.75 kg mass) to route a guitar neck from.
https://www.stepcraft-systems.com/en/accessories/system-accessories/cnc-accessories/tailstock
After much searching and only coming up with Morse Taper mini live centres, I found a suitable "mini live center Z018" with an M12 x 1 mm thread pitch version on eBay:
http://www.ebay.com/itm/New-Mini-Life-Center-Morse-Taper-For-Lathe-Center-Finder/262370943943
This might be of interest to some who wish, like me, to push the limits of what the 4th axis equipment can achieve.
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
Veröffentlicht : 03/10/2016 3:50 pm
