Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
My experience milling with G10
Milling
3
Beiträge
3
Benutzer
0
Likes
3,894
Ansichten
Themenstarter
So I cut for the first time in G10 fibre board today, 1.6mm thickness using a 2mm carbide rasp cutter. I cut 2mm down to ensure going straight through and at 4mm/s feed. I dont think I would go any faster, especially just using the proxxon but maybe with the spindle.
Cut beautifully clean, very messy and dust is apparantly extreeemely nasty but all in all nothing to be afraid of!
Veröffentlicht : 10/03/2015 11:16 pm
Super!! Yes - the dust should never be allowed near your lungs 🙂
Veröffentlicht : 12/03/2015 11:29 am
Great!
SC300 + Spindle HF500 + Portalerhöhung + LinuxCNC + gsimple
Veröffentlicht : 12/03/2015 11:55 am
Forum Information
- 44 Foren
- 7,338 Themen
- 63.2 K Beiträge
- 2 Online
- 26.3 K Mitglieder
Unser neuestes Mitglied: dicker1
Letzter Beitrag: Komplexe SVG-Datei fräsen - Probleme, die Strukturen auszuwählen
Forum Icons:
Das Forum enthält keine ungelesenen Beiträge
Das Forum enthält ungelesene Beiträge
Themen-Icons:
Unbeantwortet
Beantwortet
Aktiv
Heiß
Oben angepinnt
Nicht genehmigt
Gelöst
Privat
Geschlossen