Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
2
Beiträge
2
Benutzer
0
Likes
3,414
Ansichten
Themenstarter
Hi All, I need some guidance
The y axis of my 840 was ‘binding’. I have been in my workshop for over 8 hours trying to fix this. I have followed the tuning video step-by-step and I just cant get the thing to operate as it should as it keeps binding.
The Y axis velocity is 2000 and I am 'jogging' the machine at 60%. The machine travels - then binds - travels - then binds
I have checked:
• the lead screws and they are clean and well greased
• here are no obstructions
• the screws are 'well seated' and there is no backlash
• the belt is fine
Cheers
Rich
Any ideas how this machine can be fixed
Stepcraft 840
Kress Spindle
UCCNC
Vectric Aspire
Veröffentlicht : 10/11/2017 6:36 pm
Hi,
make a quick test: Loosen the Screws of the X-Axis on one side and test again. On mine there is too much color at the area for the bearing of the X Screw
MfG
Roy
SC 600/2; SolidWorks; UCCnC und UC100; EstlCam und Arduino Steuerung; KRESS 800kfme;
Veröffentlicht : 16/11/2017 6:24 pm
