Dear user, the forum software has been updated. For the first login please reset your password.
Spitfire 3D puzzle
This is my Spitfire 3D puzzle.
Original drawings are from MakeCNC.com who has a lot more of interesting models.
I scaled this model to the thickness of the available wood in Aspire.
This model is made from 2,8 mm birch plywood (size 400x300mm)
The panel lines are engraved with a 60 V-bit to a depth of 0.8 mm, for the inner holes I used a 0.7 mm end mill and finaly the cutting out is done with a 1.0 mm 2 flute left turning mill. Al on the high speed of 18000 rpm and for the 0.7 mm a feed rate of 500 mm/min and the others on 1200 mm/min. The pass depth is set at 80% of the mill diameter.
The model is putt together without any glue and can be disassembled just as easy.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
That sooo good.
One Cloud habe the DXF File to Build???
One Cloud habe the DXF File to Build???
May I translate your "special english" to an understandable english? If you are asking for dxf-files to build this model by your own:
CNCmiller wrote in line 2 of his posting: "... Original drawings are from MakeCNC.com who has a lot more of interesting models. ..." If you´ll read this carefully you´ll find out the net-address "makecnc.com".
Gruss Michael
begonnen mit 420/2, Alu-Fräse "KARLA" (noch im Bau)
EstlCam mit Arduino NANO, WinPC-NC USB
Kress, QCAD, Fusion 360, Inventor, Winghelper
Just like Alpenkreuzer says you can find these drawings and more on www.makecnc.com
I am not allowed to share the sold drawings from MakeCNC. So sorry no drawing.
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
- 44 Foren
- 7,338 Themen
- 63.2 K Beiträge
- 0 Online
- 26.3 K Mitglieder