Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Software
3
Beiträge
2
Benutzer
0
Likes
4,647
Ansichten
Themenstarter
Hello all,
My configuration:
Stepcraft 2/240
Stepcraft HF-500 spindle
Stepcraft Tool changer
Stepcraft Tool hight sensor
Software UCCNC
I have the software installed with the Stepcraft multi installer.
Everythings works well.
Only the speed off the HF-500 spindle is max 50%
Can someone help me with the parameters of the pwm signal.
I have sent a screenshot of the parameters
Thanks in advance
Veröffentlicht : 01/09/2017 12:52 am
Using the stepcraft 600 UCCNC profile (likely very similar to the generic stepcraft 240 UCCNC profile that may have come with your machine, depending on where you bought it), I have a slightly different spindle setup screen.
I've attached it below.
I have the stepcraft 2 600 with the HF 500 spindle, and have no problems getting up to full speed.
Veröffentlicht : 20/10/2017 5:23 am
(I'm using UCCNC 1.2037, firmware 3.0110, hardware 2.0000)
And from the stepcraft2_model600.pro file, here's the relevant section with the spindle settings:
[Spindlesetupsettings]
IsSpindleinPWMMode=True
SpindlePWMoutpin=17
SpindlePWMoutpinnegate=False
SpindlePWMdirpin=0
SpindlePWMdirpinnegate=False
SpindlePWMfrequency=900
SpindlePWMminpercent=12
SpindlePWMmaxpercent=100
Spindlesteppin=0
Spindlesteppinnegate=False
Spindledirpin=0
Spindledirpinnegate=False
Spindlestepsperunit=500
Spindleacceleration=200
Spindleminvelocity=2000
Spindlemaxvelocity=20000
Spindlerelaysenabled=True
M3relaypin=1
M3relaypinnegate=False
M4relaypin=0
M4relaypinnegate=False
M3ondelay=1000
M3offdelay=1000
M4ondelay=1000
M4offdelay=1000
Floodmistrelaysenabled=True
M7relaypin=0
M7relaypinnegate=False
M8relaypin=0
M8relaypinnegate=False
M7ondelay=1000
M8ondelay=1000
M9delay=0
SpindlePWMoutport=1
SpindlePWMdirport=0
Spindlestepport=0
Spindledirport=0
M3relayport=1
M4relayport=0
M7relayport=0
M8relayport=0
EncoderApin=0
EncoderAport=0
EncoderBpin=0
EncoderBport=0
Encoderreversedirection=False
EncoderPPR=220
Pulleyratio1=1
Pulleyminvel1=1
Pulleymaxvel1=1
Pulleyinuse=1
Pulleyratio2=1
Pulleyminvel2=1
Pulleymaxvel2=1
Pulleyratio3=1
Pulleyminvel3=1
Pulleymaxvel3=1
Pulleyratio4=1
Pulleyminvel4=1
Pulleymaxvel4=1
Pulleyratio5=1
Pulleyminvel5=1
Pulleymaxvel5=1
Pulleyratio6=1
Pulleyminvel6=1
Pulleymaxvel6=1
Pulleyratio7=1
Pulleyminvel7=1
Pulleymaxvel7=1
Pulleyratio8=1
Pulleyminvel8=1
Pulleymaxvel8=1
Pulleyratio9=1
Pulleyminvel9=1
Pulleymaxvel9=1
Pulleyratio10=1
Pulleyminvel10=1
Pulleymaxvel10=1
Pulleyratio11=1
Pulleyminvel11=1
Pulleymaxvel11=1
Pulleyratio12=1
Pulleyminvel12=1
Pulleymaxvel12=1
Pulleyratio13=1
Pulleyminvel13=1
Pulleymaxvel13=1
Pulleyratio14=1
Pulleyminvel14=1
Pulleymaxvel14=1
Pulleyratio15=1
Pulleyminvel15=1
Pulleymaxvel15=1
Usepulleys=False
Veröffentlicht : 20/10/2017 5:33 am
