Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Assembly and Maintenance
2
Beiträge
2
Benutzer
0
Likes
5,533
Ansichten
Themenstarter
Hi ! I have this error and i cannot move the axis even if i press the overwrite limits button.
"The reset logic of the software is active!
remove the reset condition with pressing the blinking reset button on the screen.
if the reset condition cannot be removed can be due to an external e-stop button is pressed in or a limit switch on the machine tool is active. please check the diagnostic page for the input signals condition."
External reset button isn't pressed. I don't know what to do. ( I saw your video Stepcraft Support - Troubleshooting UCCNC Reset Logic and that's the one who made me write this).
Veröffentlicht : 23/04/2021 1:23 pm
Did you check the emergency stop button of the machine?
Sometimes people did not recognize that this button is pushed, sometimes there were loose connections - either on button side or on PCB side. A loose connection would be treated like the button has been pushed. The emergency-stop is a real hardware stop, and it can not be ignored by the software, like it can be done for the limit switches.
SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
Veröffentlicht : 24/04/2021 3:42 pm
