Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Introduce Youself
3
Beiträge
3
Benutzer
0
Likes
3,711
Ansichten
Themenstarter
hi guys,
i'm new on this forum, i write from italy;
waiting for my ST2 420+uc100+uccnc with tool lenght sensor,t-slot table, vise pm60, HF 500 spindle and vacuum adapter;
after i must assemble it and start 😆
after i've preventivated to take all the spare parts like enclosure, 4th axes and automatic tool changer;
if you have any council to give me, are well accepted
thank you all!!!
bye!! 😉
Veröffentlicht : 18/05/2017 1:33 pm
Ciao Andrea.
Welcome to the forum. Hopefully you won't have any problems with your 420 machine; the smaller footprint models don't seem to exhibit the issues "a small percentage of users" have experienced with their machines.
Doug
Stepcraft 2/840, StoneyCNC industrial HF spindle, 4th axis, TurboCAD 2016 Professional 64 bit, MeshCAM, GWizard feeds & speeds calculator, UCCNC
Hobby use: guitar building (luthiery), https://dsgb.net
Veröffentlicht : 18/05/2017 8:08 pm
Hello Andrea,
Welcome,I hope you will enjoy your machine.
A tip on forehand RTFM (Read The F* Manual) no joke make yourself familiar with the parts to use.
Don't tighten the screws on the portal, align x-axis first and Y-axis bed, first slide in your T-slot plate, test the smooth rolling of the Y-axis, then tighten the screws.
good luck
SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021
Veröffentlicht : 18/05/2017 9:57 pm
