Suche
Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Looking to buy a D4...
 
Benachrichtigungen
Alles löschen

Looking to buy a D420 for RC Planes

4 Beiträge
2 Benutzer
0 Likes
2,376 Ansichten
David Sargent
(@slackboy)
Beiträge: 3
Active Member
Themenstarter
 

Hi,

I'm David and like the title says I'm thinking of getting a D420 for building RC planes. I'll be milling balsa and ply and very occasionally aluminium. Maybe one day i'd get the laser head as well.

I think the spec i'd like to go for is using UCCNC via a ethernet connection, with a MM1000 DI. I'd also like to automatically trigger the dust extraction.
I'm a bit confused about how and where all the connections would go? Do I need the switch box, 2nd layer module and two SE2300?

It would be good if Stepcraft had connection diagrams somewhere on the website showing how things went together - or have I just missed them?

Thanks for any help
David

 
Veröffentlicht : 21/11/2021 8:45 pm
(@cncmiller)
Beiträge: 230
Reputable Member
 

Hello David,

A D420 is ok for RC plane building only think twice on how big your planes will become in the future and if a D420 is than still suitable.
You want to use UCCNC (I personally don't use that) that's ok but I don't think Ethernet control is wise.
If there is a hick-up in the connection your work is destroyed.
The same as controlling the vacuum dust extraction, why automatic? You are at the machine to set the X-Y zero point and start the milling process. So what is the problem to switch the vacuum cleaner on?
And it is not smart to leave the machine unattended while milling a job, especially in the beginning when you are learning the process.

The SE2300 is good investment for the spindle, its saver and the spindle starts / stops according to the codes provide by the post-processor in the G-code or/and commands from the UCCNC software.

SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021

 
Veröffentlicht : 24/11/2021 11:16 am
David Sargent
(@slackboy)
Beiträge: 3
Active Member
Themenstarter
 

Thats a really helpful reply - thanks for taking the time to do it.

Why does an issue with ethernet cause issues? Wouldn't you have the same problems with USB?

I do agree about the extraction. Why spend the money on automated control when you're stood next to the machine anyway.

Lots to think about, thanks.

 
Veröffentlicht : 24/11/2021 9:46 pm
(@cncmiller)
Beiträge: 230
Reputable Member
 

" Why does an issue with ethernet cause issues? Wouldn't you have the same problems with USB? "

You have a point here.
When loosing the connection whatever the course is your work is almost always ruined.
But I find that USB is more stable than an Ethernet or a WiFi connection. But its completely your choice.

Don't think a milling machine works the same as a 3D-printer, just start a job and come back after a few hours.
Yes the controls are almost similar but the rotating endmill is a killer, it can ruin your machine and even worse.
Do not underestimate the force the spindle create.

SC 1/420 + Gantry extension, Kress 1050 FME-P, NeJe 20W Laser, WinPC-NC USB v4.00, Vectric Aspire 9, SolidWorks 2021

 
Veröffentlicht : 26/11/2021 12:50 pm
Teilen: