Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Milling
4
Beiträge
4
Benutzer
0
Likes
5,237
Ansichten
Themenstarter
Hi all,
I'd like to ask for some advice on milling carbon fiber. I have never touched any composites so am fairly unaware of potential issues. Has anyone done this?
I hear that the dust is pretty nasty so extraction is vital, what systems do you use? What about cutting tool, Im assuming a rasp will suffice. Also cutting speeds etc.
Any experience on anything like this would be greatly appreciated.
Kindest,
Alex
Veröffentlicht : 21/02/2015 2:57 pm
Dust is the devil here!!
can get good results with standard cutters. But you have to be careful you don't pull the fibre from the resin.
these guys were excellent... but not cheap.
Veröffentlicht : 22/02/2015 3:52 am
I found this, I hope that is your help
Step Craft 420 - Carbon Fiber, milling in a water bath; is in German, but as they say; "A picture is worth a thousand words"
Veröffentlicht : 01/03/2015 7:58 pm
...
What about cutting tool, Im assuming a rasp will suffice.
...
I don`t have any experience with carbon fiber, but when I was looking for wood cutting tools I noticed spiral toothed and diamond toothed bits had carbon fiber mentioned in description. For example: http://www.sorotec.de/shop/Cutting-Tools/1-8--Shaft-Mill-Tools/
Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2
Veröffentlicht : 02/03/2015 10:38 pm
