Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Milling
4
Beiträge
3
Benutzer
0
Likes
4,983
Ansichten
Themenstarter
This video shows a 1mm cutter being used to mill a biplane out of plywood. The toolpaths were created in VcarvePro and the machine was controlled with Mach3.
Veröffentlicht : 26/08/2014 2:48 am
Hi Rory,
thanks for the great and informative videos.
You could do me a favor and tell me the machine parameters (which bit, how many flutes maybe, feed rate, depth per pass ...).
FOR ME! it looks as if the cutter is flying through the material :woohoo:
Would be very interested. Thanks for your help!
Gruß Toni
Stepcraft 600/V1 - Kress 800FME - WinPC NC USB Vollversion 2.50/09 - EstlCam 7/8 Vollversion - Illustrator - QCad
Veröffentlicht : 19/01/2015 10:38 pm
Looks nice, would like to know as well which depth/speed/tool data 🙂
I broke yesterday 3x1mm tolls when testing, mainly in corners but I was going with 300mm/min only.
Frank
Steppcraft 600/2 + HF500 + SwitchBox + Laser + Schleppmesser
Absaugung und Vakuumtisch
an Mach3 oder UCCNC mit Taster für Z-Null und Werkzeuglänge
Veröffentlicht : 20/01/2015 12:24 am
Themenstarter
2mm and 4mm plywood in these sort of tests.
- 1mm diameter 2 fluted carbide upcutter
- these are very easy to break
- make sure the part is well stuck to the table.
- use spray glue as well as clamping
- any vibration will break cutter
- spindle speed at max
- feed rate at 1000mm/min
- 1 or 2mm per pass
- with cutters you want the cutter as far into the collet with as little cutter sticking out as possible. It helps reduce vibration.
The 1mm tools are tricky and VERY sensitive.
Best use a 2mm if you can.
Hope this helps.
Veröffentlicht : 20/01/2015 8:29 pm
