Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Operation
5
Beiträge
3
Benutzer
0
Likes
4,649
Ansichten
Themenstarter
Hello all,
I've finally buy and build my machine; A stepcraft 840.
I'm very happy as the build was not too complex, but now, it's time to work with the machine.
I have the win PC-NC starter and I can drive the machine with the jog menu.
I follow all the window in the menu and I have some questions (and others questions will follow as I'm a complete newbie);
-Do I have to register myself (upgrade window) ? Upgrade to which version ?
-Is it normal that sometime, when I open WinPC-NC, menus are not the same ? Sometime I have more options, sometimes less ?
-Can I do 3D project with this WinPC-NC ?
-I've tried some milling (the teddy bear provided with WinPC-NC)but I don't know how to tell to the machine to start milling where I want.
-How to do to center a piece to mill ?
Thanks for help !
Olivier
http://voodoof3k.blog4ever.com/
Veröffentlicht : 25/04/2015 9:55 pm
- It is recommended to register. If you want to upgrade to the full version they need to find you in the list of registered customers, so that you get the upgrade for 200€
- WinPC NC executable itself IS alsready the full version. As long as you start it without the machine switched on, it shows you all the functionality. As soon as WinPC finds the stepcraft during startup, it will fall back to the Starter version if there is no key for the Full version.
- No 3D with Starter, not even proper 2,5D, as you can only load 2D files. With the full version it's 3D.
- First youd run the reference search, then you load the file you want to mill and move the graphics on the screen to the position with the buttons (I think it was the pin needle)
- Try the parameter "Zero in File" (or something similar - I don't know the english version) and set it to center
SC 420 mit DIY parallel + Proxxon mit Mod + HF500 + SprintLayout + LibreCAD/QCAD + FreeCAD +WinPC starter/USB->EstlCAM + EstlCAM LPTAdapter + EstlCAM Handrad + DIY Vakuumtisch
Gruß, Andreas
Veröffentlicht : 25/04/2015 10:09 pm
Themenstarter
Thanks for answers !
I have unplugged the machine and I have full access to menu.
For register, I need to send an email (to the adress on the pop up) with the provided code, right ?
Olivier
http://voodoof3k.blog4ever.com/
Veröffentlicht : 25/04/2015 10:34 pm
I did send my full address and the 7-digit serial number.
When contacting with Lewetz always with your serial number or you will be ignored!
Autodesk Inventor 3D / Altium PCB Designer / 3D printing / Winpc-NC / UCCNC / Mach3 / Proxcon IBS/E > Stepcraft 2/600 - Google translate Dutch > German is my best friend
Veröffentlicht : 26/04/2015 8:55 am
Themenstarter
I've just have a look at possible format that winPC-NC can read; .PLT, .DXF, .OPT, .EPS, .NCP, .DRL ...
When I upgrade, do the full version (3D) of WinPC-NC can open more file format ?
http://voodoof3k.blog4ever.com/
Veröffentlicht : 26/04/2015 8:10 pm
