Spindle load indica...
 
Benachrichtigungen
Alles löschen

Spindle load indicator

2 Beiträge
2 Benutzer
0 Reactions
5,598 Ansichten
(@tikka)
Beiträge: 105
Estimable Member
Themenstarter
 

I`m used to having a load indicator on the mills and lathes I work with, so I decided to assemble one for the Proxxon IBS/E, Dremel 3000 or other 100-200W spindles that I plan to use with my Stepcraft machine. It is connected between a wall socket and the tool. Maybe it would be better to mount it between the controller and the motor, but the first option is easier to do and more convenient when changing spindles. Besides I plan to use full revs most of the time.

The parts are available at electronics shops and regular sellers of construction materials. The most expensive component is the AC ammeter. I got the biggest one available at the time, because bigger is usually cheaper when it comes to electronics at least. Chose the dial indicator because digital ones are sometimes difficult to read in case of alternating loads. I haven`t checked the accuracy of the indicator and I`m more interested in relative indications. On my first part milling the highest load was achieved when cutting a groove into birch plywood at 600mm/min feed, 2,15mm cutting depth with a 2 flute fishtail carbide milling bit. The indicator showed about 0,3A that translates into 66W or 66% of max power in case of IBS/E. Don`t take this as a recommended setting.

Stepcraft 600SF (version 1) parallel port
Proxxon IBS/E
Mach3
devCad Cam Pro; devWing Cam; devFus Cam; Profili Pro 2

 
Veröffentlicht : 03/11/2014 11:41 pm
(@rory)
Beiträge: 384
Reputable Member
 

It will be very interesting to see the power requirements for different materials. Looking forward to seeing these tests. thank you!

this project requires wiring the AC mains feed to the machine given the Ammerer is on the AC line to power the machine.

The STEPCRAFT system requires users only to wire the low level voltage in the machine. The lethal mains AC should not be touched unless you are trained to do so.

Be very careful when working with mains AC. Electricity is lethal.

 
Veröffentlicht : 07/11/2014 8:38 pm
Teilen: