Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.

Benachrichtigungen

Alles löschen

Automatic tool change. fusion 360

Software

Letzter Beitrag von Per Takman Vor 7 Jahren

5 Beiträge

3 Benutzer

0 Likes

5,372 Ansichten

RSS

Malcolm Burns

(@clive-23)

Beiträge: 14

Eminent Member

Themenstarter

Hello

How do I stop the Machine from doing a automatic tool change without have to edit the G-code . I don't have a automatic tool change
Where do I turn this feature off in fusion 360

Thanks

Veröffentlicht : 27/10/2016 2:22 am

Antonio

(@nio)

Beiträge: 16

Eminent Member

Hi there,
In my post processor I´ve got useToolChanger set up to "No", but i think it´s the default value :(..

Stepcraft 840 + CCNC
Kress 1050 and in a near future with SuperPID

Veröffentlicht : 06/11/2016 12:51 pm

Malcolm Burns

(@clive-23)

Beiträge: 14

Eminent Member

Themenstarter

Thank you for that

Veröffentlicht : 11/11/2016 12:56 am

Malcolm Burns

(@clive-23)

Beiträge: 14

Eminent Member

Themenstarter

Hello

I had a look on my post process where it says ( use tool changer no ) but the Y axis always goes down to the bottom right corner and the X axis goes all the way to the right and Z goes all the way to the top Walt 3 second and then come back and start to mill

Thanks

Veröffentlicht : 11/11/2016 2:12 am

Per Takman

(@per-takman)

Beiträge: 36

Eminent Member

Check the settings in UCCNC configuration as well. There is an option for how UCCNC should handle tool changes. Another thing to consider if you're posting several strategies into one NC-file which all use the same tool is to make sure that you've sorted out the tool numbering in Fusion.

Good luck!

/Per

Veröffentlicht : 05/01/2017 11:26 am