Lieber Nutzer, die Forumssoftware wurde aktualisiert. Für die Erstanmeldung musst Du bitte dein Passwort zurücksetzen.
Dear user, the forum software has been updated. For the first login please reset your password.
Dear user, the forum software has been updated. For the first login please reset your password.
Benachrichtigungen
Alles löschen
Fräsen
4
Beiträge
2
Benutzer
0
Likes
4,712
Ansichten
Themenstarter
Hi,
I noticed this (Stepcraft 600) : "Other drilling-/milling spindles up to a power limit of 500 watts can also be used". Is it possible to use something more powerful like Kress 1050?
br
Markku
www.sloworks.fi
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 19/05/2014 2:10 pm
Hi, you can use the original Stepcraft HF-350 / 500 Spindle :whistle:
The Kress 1050 is too big for the "little" Stepcraft Machine :S
You have to modifie some parts...
I advise on the Kress!
Liebe Grüße
Chris
CorelDraw X3 / AutoCAD 2013/2014 -> BoCNC / EstlCAM -> WinPC NC USB -> Stepcraft 420
Veröffentlicht : 19/05/2014 2:29 pm
Themenstarter
Ok, thanks. How about Kress 530?
br
Markku
br
Markku
www.stepcraft.fi (reseller in Finland)
www.sloworks.fi
SOLIDWORKS, WinPC-NC Full, EstlCAM, SC1/600 + HF500W, laser
BCN3D Sigma
Veröffentlicht : 19/05/2014 2:38 pm
It's also too big.
Also the diameter is to big, you have to change some parts before you can use the Kress.
I won't use the Kress, it's not a spindle for our Stepcraft Machine :whistle:
Liebe Grüße
Chris
CorelDraw X3 / AutoCAD 2013/2014 -> BoCNC / EstlCAM -> WinPC NC USB -> Stepcraft 420
Veröffentlicht : 19/05/2014 2:46 pm
